User's Manual

AP-952X Industrial Wall-mounted Wireless-N/BG AP/Bridge
User's Manual
32
 Key Length : Select the desire option are 64 bits, 128 bits or 152 bits from drop-down list.
 WEP auth Method : Enable the desire option among Open system or Shared.
 Key Index : Select key index used to designate the WEP key during data transmission. 4 different
WEP keys can be configured at the same time, but only one is used. Effective key is set with a choice
of WEP Key 1, 2, 3, or 4.
 WEP Key : Enter HEX format WEP key value; the system support up to 4 sets of WEP keys.
3. WPA-PSK (or WPA2-PSK) : WPA (or WPA2) Algorithms, allows the system accessing the
network by using the WPA-PSK (WPA2-PSK) protected access.
 Cipher Suite : Check on the respected button to enable either AES or TKIP cipher suites; default is
TKIP.
 Group Key Update Period : This time interval for re-keying GTK (broadcast/multicast encryption
keys) in seconds. Enter the time-length required; the default time is 600 seconds.
 Master Key Update Period : This time interval for re-keying GMK (master key used internally to
generate GTKs) in seconds. Enter the time-length required; the default time is 83400 seconds.
 Key Type : Check on the respected button to enable either ASCII or HEX format for the Pre-shared
Key.
 Pre-shared Key : Enter the information for pre-shared key; the format of the information shall
according to the key type selected.