User's Manual

Step 4b Log in to your router’s configuration page from the web browser and click on

Wireless. Then click Wireless security. Make sure that the Wi-Fi Protected

Setup Enable box is checked. Click the Add Wireless Device Wizard button.

Step 4c Enter the Pin Code in the Pin Number box and click Connect.

After a few moments both the router configuration screen and the adapter configuration

screen should show a message telling you that you are connected.

Step 4d Click Continue on the router configuration screen.

Note: If you cannot connect successfully with WPS, you need to log in to your router’s

configuration and click on Wireless. Then click Wireless security. Make sure that the

Wi-Fi Protected Setup Enable box is checked.