User Manual
5
ENGLISH
In Access Point (AP) Mode, 802.11n/g/b compliant wireless devices
and Ethernet LAN devices can connect to the network.
AP Router Mode can share an Internet connection with 802.11n/g/
b compliant wireless devices and Ethernet LAN devices. This mode
contains additional features, allowing the device to act as a router.
Note: The current operating mode will be listed under the device’s
name in the conguration menu tree.
conFIGURInG tHe DeVIce UsInG a WeB BRoWseR
Open a web browser and type http://192.168.0.50 into the address
bar.
Enter admin as your username and leave the password blank to log
in to the web UI.
The $3+; features two different operating modes, allowing it
to adapt to any situation. Select the operating mode by clicking on
the radio button that corresponds to the desired mode, then click
on Change Mode. After conrming that the operating mode will
be changed, the AP will reboot and will be ready for use after 40
seconds.