Product Info
Table Of Contents
- 1 Introduction
- 2 Applicable Module
- 3 Additional Regulatory Conformance Testing and/or Submissions Required by the Integrator
- 4 Compliant/Allowable Tx Power Settings
- 5 Allowable Antennas to use with the Radio Module
- 6 Antenna Placement inside the Host System and RF Safety
- 7 Simultaneous Transmission with other Integrated or Plug-in Radios
- 8 Module May Not Be Installed by End Users
- 9 Required Labeling on the Outside of the Host
- 10 Required Labeling on the Module
- 11 Required Regulatory Wording for User Manual/Installation Manual
- 12 OEM Integrator Checklist
Title
Date
Originated
15-Nov-
182015
Revision:
C
INTRINSYC TECHNOLOGIES
CORP.
Doc #: ITCNFA324-IG-001
Date Revised:
30-Nov-2018
i
Intrinsyc – Confidential Information
IDENTIFICATION
Document Title ITCNFA324 Module Certification
Document Number ITCNFA324-IG-001
Version C
Date 30-Nov-2018
HISTORY
Version Date Purpose Pages
A 27-Jul-15 Original Document All
B 26-Oct-16
Added additional dipole antenna to Allowable
Antennas. Removed reference to the FCC Interference
Handbook booklet in section 11.1 as FCC does not
produce the handbook anymore.
1, 2, 6
C 30-Nov-18
Added additional chip and Kontron WiFi Flag
antennas to Allowable Antennas.
1,2
Note: The ITCNFA324 radio module (the “Module”) is designed for use only in specific countries in which
Intrinsyc has obtained certificates of compliance with local laws and regulations. Therefore, the Module may not be
sold, operated or incorporated into products for use in countries for which it has not been certified. In addition, any
deviation from the settings, methods, conditions and restrictions for integration of the Module into a host system, as
defined in this document, could be a violation of applicable national law and may be punishable as such, and in such
event, the products into which the Module is incorporated may not be lawfully distributed or sold in such countries.
Intrinsyc assumes no responsibility for any such liability or loss related to installation or operation of the Module.