Product Info

Intrinsyc Open-Q™ 626 (APQ8053) SOM Module Certification Technical Note 68: OEM Integrator Guide

Rev. 1.1

subject to the following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including interference that may

cause undesired operation.

WARNING: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates and radiates radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one of more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from the one the receiver

is connected to.

• Consult the dealer or an experienced radio or TV technician for help.

(Notice for 5GHz and/or when co-located with 5GHz transmitters, the following

statements should be provided for user information.)

Operations in the 5.15-5.25GHz band are restricted to indoor usage only. (For 5GHz only)

IMPORTANT! Changes or modifications not expressly approved by [System

Manufacturer Name] could void the user’s authority to operate the equipment. This

transmitter must not be co-located or operating in conjunction with any other antenna

or transmitter.

FCC RF Exposure Requirements:

This product complies with the FCC RF exposure limit set forth for an uncontrolled

environment and is safe for intended operation as described in this manual. This device is

only authorized for use in a mobile application, at least 20 cm of separation distance

between the radiating antenna and the user's body must be maintained at all times. Further

RF exposure reduction can be achieved if the product can be kept as far as possible from the

user’s body or set the device to a lower output power if such a function is available. Separate

approval is required for all other operating configurations, including portable configurations

with respect to 47 CFR Part 2.1093 and different antenna configurations.