User Guide

1. Using This Guide
Purpose and Audience
This guide covers the DeviceLinx Micro125 embedded device server. It provides the
information needed to configure, use, and update the Micro125 firmware and is intended for
OEMs and system integrators who are embedding Micro125 in their end product designs.
Chapter Summary
The remaining chapters in this guide include:
Chapter Description
2: Introduction
Describes the main features of the Micro125 and the protocols it
supports.
3: Getting Started
Provides information for physically connecting your unit.
4: Using DeviceInstaller
Provides information for getting your unit up and running, using
DeviceInstaller to assign an IP address.
5: Configuration Using Web
Manager
Details using the Web-Manager to set parameters such as port
and server properties.
6: Configuration via Telnet or
Serial Port (Setup Mode)
Provides instructions for accessing Setup Mode (command line
interface) using a Telnet connection through the network or a
terminal or terminal emulation program through the serial port.
7: Setup Mode: Server
Configuration
Details the network (server) settings
8: Setup Mode: Channel
Configuration
Details the serial port settings.
9: Setup Mode: Advanced
Settings
Details expert, and security settings and explains how to reset
the unit to factory default values.
10: Firmware Upgrades
Provides instructions for obtaining the latest firmware and
updating the Micro125.
11: Monitor Mode
Provides instructions for accessing and using the command line
interface for monitoring the network and diagnosing problems.
12: Troubleshooting
Describes common problems and error messages and how to
contact Lantronix Technical Support.
A: Binary to Hexadecimal
Conversions
Provides instructions for converting binary numbers to
hexadecimals.
Micro125 User Guide 7