User guide
Table Of Contents
- EDS1100/2100 User Guide
- 1: About This Guide
- 2: Overview
- 3: Installation of EDS1100
- 4: Installation of EDS2100
- 5: Using DeviceInstaller
- 6: Configuration Using Web Manager
- 7: Network Settings
- 8: Line and Tunnel Settings
- 9: Terminal and Host Settings
- 10: Services Settings
- 11: Security Settings
- 12: VIP
- 13: Maintenance and Diagnostics Settings
- 14: Advanced Settings
- 15: Branding the EDS1100/2100
- 16: Updating Firmware
- A: Technical Support
- B: Binary to Hexadecimal Conversions
- C: Compliance
- Index

13: Maintenance and Diagnostics Settings
EDS1100/2100 User Guide 127
System
The System web page enables the rebooting of the device, restoring factory defaults, uploading
new firmware, specifying the short and long name, and viewing the current system configuration.
To configure system settings, perform the following steps.
1. Click System on the Main Menu. Figure 13-18 shows the page that displays.
Figure 13-18 System Web Page
2. Enter or modify the fields in Table 13-8.
Table 13-8 System Fields
Field Description
Reboot Device Click Reboot to reboot the system. The system refreshes and redirects the
browser to the home page.