User guide

7: Network Settings
EDS1100/2100 User Guide 38
Network 1 Interface Configuration
To configure the Network interface, perform the following steps.
1. Click Network on the Main Menu.
2. Click Network 1 > Interface > Configuration. Figure 7-2 shows the page that displays.
Figure 7-2 Network 1 (eth0) Interface Configuration Web Page
3. Enter or modify the fields in Table 7-3.
Table 7-3 Network 1 Interface Configuration Fields
Field Description
BOOTP Client Select On or Off. At boot up the EDS1100/2100 will attempt to obtain an IP
address from a BOOTP server.
Notes:
 Overrides the configured IP address, network mask, gateway,
hostname, and domain.
 When DHCP is On, the system automatically uses DHCP, regardless of
whether BOOTP Client is On.