User guide
Table Of Contents
- EDS1100/2100 User Guide
- 1: About This Guide
- 2: Overview
- 3: Installation of EDS1100
- 4: Installation of EDS2100
- 5: Using DeviceInstaller
- 6: Configuration Using Web Manager
- 7: Network Settings
- 8: Line and Tunnel Settings
- 9: Terminal and Host Settings
- 10: Services Settings
- 11: Security Settings
- 12: VIP
- 13: Maintenance and Diagnostics Settings
- 14: Advanced Settings
- 15: Branding the EDS1100/2100
- 16: Updating Firmware
- A: Technical Support
- B: Binary to Hexadecimal Conversions
- C: Compliance
- Index

9: Terminal and Host Settings
EDS1100/2100 User Guide 69
Figure 9-3 Terminal on Line 1 Configuration Web Page
Enter or modify the fields in Table 9-4.
Table 9-4 Terminal on Line 1 Configuration Fields
Field Description
Terminal Type Enter text to describe the type of terminal. The text will be sent to a host via
interpret as command (IAC).
Note: IAC is a method to send commands over the network such as send
break or start echoing.
Login Connect Menu Select the interface to display when the user logs in. Choices are:
Enabled —Shows the Login Connect Menu.
Disabled—Shows the CLI
Exit Connect Menu Select whether to display a choice for the user to exit the Login Connect
Menu and reach the CLI. Choices are:
Enabled—A choice allows the user to exit to the CLI.
Disabled—There is no exit to the CLI.