User Guide

5: Installation of EDS8PR, EDS16PR and EDS32PR
EDS User Guide 38
Figure 5-3 RJ45 Serial Port
Ethernet Port
The back panel has an RJ45 Ethernet port. This port can connect to an Ethernet (10 Mbps) or Fast
Ethernet (100 Mbps) network.
The Speed LED on the back panel shows the connection speed of the connected Ethernet
network.
You can configure the EDS to operate at a fixed Ethernet speed and duplex mode (half- or full-
duplex) or auto-negotiate the connection to the Ethernet network.
LEDs
Light-emitting diodes (LEDs) on the front and back panels show status information.
Front panel. The front panel has a green Power LED.
Back panel. Each serial port has a Transmit and a Receive LED. The Ethernet connector has
Speed and Activity LEDs. There is also a Power LED and a Status LED.