User's Manual

5: Commands and Levels
IntelliBox-I/O 2100 Command Reference 66
no remote address
Clears the remote address of the host.
no ssh username
Clears the SSH username associated with the host.
protocol ssh
Sets the protocol to SSH.
protocol telnet
Sets the protocol to Telnet.
remote address <text>
Sets the IP address of the remote host to connect to when
this host is
remote port <number>
Sets the remote port used to connect to the host.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
ssh username <text>
Sets the username for logging into the host via SSH.
write
Stores the current configuration in permanent memory.
http (config-http) level commands
auth <uri> <realm>
Creates a new HTTP server authentication directive.
auth type <uri> basic
Sets an HTTP server authentication directive to the Basic
Access
auth type <uri> digest
Sets an HTTP server authentication directive to the Digest
Access
auth type <uri> none
Sets the authentication type for an HTTP server authenti-
cation directive to
auth type <uri> ssl
Sets the authentication type for an HTTP server authenti-
cation directive to SSL.
auth type <uri> ssl-basic
Sets the authentication type for an HTTP server authenti-
cation directive
auth type <uri> ssl-digest
Sets the authentication type for an HTTP server authenti-
cation directive
auth user <uri> <user> <password>
Creates or modifies a user for an HTTP server authentica-
tion directive.
clear counters
Sets the HTTP counters to zero.
clear log
Clears the HTTP server log.
clrscrn
Clears the screen.
default log format
Restores the HTTP Server log format string to its default
value.
default log max entries
Restores the default maximum number of HTTP Server
log entries.
default max bytes Resets the default maximum bytes the HTTP Server will
accept when receiving
default max timeout
Resets the default maximum time the HTTP Server will
wait when receiving
default port
Resets the HTTP Server port to its default value.
default ssl port
Resets the HTTP Server SSL port to its default value.
delete auth <uri>
Deletes an existing HTTP Server authentication directive.
delete auth user <uri> <user>
Deletes an existing user for an HTTP Server authentica-
tion directive.
exit
Returns to the config level.
log disable
Disables HTTP server logging.
log enable
Enables HTTP server logging.
log format <string>
Sets the log format string for the HTTP server, using the
following
max bytes <bytes>
Sets the maximum number of bytes the HTTP server ac-