Integration Guide

2:Description and Specifications
MatchPort b/g Pro Integration Guide 20
Receiver Sensitivity -69 dBm for 54 Mbps
-88 dBm for 11 Mbps
-85 dBm for 6 Mbps
-91 dBm for 1.0 Mbps
W_LINKLED Current Max 10 mA
Technical Specifications
Table 2-6. Specifications
Category
MatchPort b/g Pro
CPU
Lantronix DSTni-FX 32-bit Microprocessor, 166 MHz internal bus,
83 MHz external bus
Memory
64 Mbits Flash and 64 Mbits SDRAM
Firmware Upgradeable via TFTP, FTP, and the Web
Configuration Pins Up to 7 pins if no DTR or DCD is used on serial ports.
Reset Circuit RESETIN# is low active and push-button type. Minimum RESETIN# pulse
width is 2 ms at IIL = -500 µA. Reset is also triggered if 3.3V at pin P1.37
drops below 2.93V typically.
Serial Interface CMOS (Asynchronous) 3.3V - level signals
Speed software selectable and customizable (300 bps to 230400 bps)
Serial Line Formats 7 or 8 data bits, 1-2 Stop bits, Parity: odd, even, none
Modem Control DTR, DCD using CPs
Flow Control XON/XOFF (software), CTS/RTS (hardware), none
Network Interface Ethernet 10/100 base TX with Auto Negotiation, and HP Auto MDIX
Protocols Supported ARP, UDP, TCP, Telnet, ICMP, SNMP, DHCP, BOOTP, Auto IP, HTTP,
HTTPS, SMTP, TFTP, FTP
Management Internal web server, SNMP
Serial login, Telnet login, DeviceInstaller software, SSH
Internal Web Server Serves web pages
WEB storage capacity: approx. 2.5 MB
Security Password protection, locking features
Average Power
Consumption (at
3.3V)
0.8 W with Power Management enabled
0.85 W with Power Management disabled
Weight 1 oz (28 g)
Cover Material ABS
Temperature Operating range: -40°C to +70°C (-40°F to +158°F)
Storage range: -40°C to +85°C (-40°F to 185°F)
Warranty 2-year limited warranty
Included Software Windows™ 98/NT/2000/XP-based Device Installer configuration software
and Windows™-based Com Port Redirector and Secure Com Port
Redirector, DeviceInstaller, and Web-Manager.