User Guide
Open-Q 660 uSOM Wi-Fi/BT Certification OEM Integrator Guide
23
12 OEM Integrator Checklist
The OEM Integrator will integrate the Module in the host systems in accordance with the instruction
specified in this document and the documents referenced herein.
The OEM Integrator will ensure the Module is integrated in a host system using only antennas
that are of the same type and having equal or less antenna gain as described in this document.
The OEM Integrator will ensure the antenna placement inside the host system will maintain the
required spacing to the end user for RF Exposure compliance, as specified in this document.
If other radios are integrated inside the host with the Module, the OEM Integrator will contact a
test lab or TCB to determine if additional FCC compliance evaluation is required to meet FCC
collocation rules.
The OEM Integrator will ensure end user documentation will contain the specified regulatory
wording and ensure the host system and the Module itself is labeled as specified in this
document.
The OEM Integrator will ensure that nothing is done that will change the transmit power level of
the module.
The OEM Integrator will ensure end user documentation will contain clear instructions on how to
access the FCC ID and IC Number of the module should an electronic display (e-labeling) be
used to meet the FCC and IC labeling requirements (Refer to FCC KDB 784748 D02 e labeling
document and IC Notice 2014-DRS1003 for guidance).
The OEM Integrator will ensure end user documentation will contain clear instructions on how to
access the FCC ID and IC Number of the module should an electronic display (e-labeling) be
used to meet the FCC and IC labeling requirements (Refer to FCC KDB 784748 D02 e labeling
document and IC Notice 2014-DRS1003 for guidance).
The Open-Q 660 uSOM is a pre-certified Wi-Fi/BT module that requires specific binary files for
WLAN and BT, and a WLAN configuration file to maintain compliance. The correct binary files for
WLAN and BT along with the WLAN configuration file are included with the Android releases from
Lantronix (as indicated in the software release notes). Customers programming the SOM with
other OS images must contact Lantronix to ensure they have incorporated the correct files to
maintain compliance.
For Open-Q 660 uSOMs intended for sale in Europe, please ensure that it has been reconfigured
for Europe as default configuration is for FCC and will not be CE complaint. Please contact
Lantronix Technical Support for the instructions on how to configure for Europe.