Product Info
Open-Q 865 SOM_Module_Certification_TechNote89_OEM_Integrator_Guide
Rev. 1.3
3
Lantronix
1. INTRODUCTION
This document describes the steps that the OEM integrator must follow when designing and
manufacturing a system utilizing the Open-Q 865 SOM Transmitter Module.
Failing to follow the instructions in this document may invalidate the FCC and IC (Industry
Canada) certifications and authorizations of the Module for use in the U.S. and Canada.
The Module certifications described in this document apply only to radio conformance for the
Module. The OEM integrator is responsible for all system-level EMI/EMC and Product Safety
testing and certifications that apply to the host system in the U.S. and other countries where
the system will be marketed or sold.
2. APPLICABLE MODULE
PMN
USA/FCC
CANADA/IC
Open-Q 865 SOM
R68OQ865S
3867A-OQ865S
3. ADDITIONAL REGULATORY CONFORMANCE TESTING AND/OR
SUBMISSIONS REQUIRED BY THE INTEGRATOR
The modular certifications apply to the radio conformance for the Module only.
The OEM integrator is responsible for additional system-level EMI/EMC and
Product Safety testing and certification that applies in the U.S. and other countries to
the host system containing the Module. This includes but is not limited to Federal
Communications Commission (“FCC”) Part 15 Class B Digital Emissions.
These system-level EMC tests are to be done with the Module installed and included
in the scope of the submission.
Some of the countries for which modular certifications are provided require
additional submissions, authorizations or import permission by the system-vendor or
importer. The integrator is responsible for these additional actions.
Modular radio certification is not possible in some countries. For such countries,
OEM integrators must ensure radio certification for the end system is obtained,
before placing the product on the market.
4. COMPLIANT/ALLOWABLE TX POWER SETTINGS
Any adjustments made to increase transmit power settings will invalidate all radio
certifications for this module.