User's Manual

PW2050 Embedded Device Server Integration Guide 17
Figure 錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。-4 U.FL to U.FL Cable
(Lantronix Part Number 500-181-R-ACC)
Figure 錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。-5 Reverse-SMA to U.FL
(short) (Lantronix Part Number 500-182-R-ACC)
Antenna Placement
When designing the PW2050 Wi-Fi module to a mating board, it is important to consider the
final installation of the unit and its location with respect to connecting access points. The
antenna should be placed so that it has as clear as possible path to the connecting access
point for maximum range. Avoid placing the antenna such that it is blocked by metal walls or
ground planes of adjacent circuit boards.
When using the on board chip antenna it is recommended to place the module such that the
antenna region is along the edge of the board or extending outward from the edge of the board.
The area under the chip antenna region should be voided of all signals and planes