User's Manual

PW2050 Embedded Device Server Integration Guide 7
1: Introduction
About the Integration Guide
This user guide provides the information needed to integrate the Lantronix® PW2050™ family
of products into customer-printed circuit boards. This manual is intended for engineers
responsible for integrating the PW2050 module into their product. The scope of this document
provides how to connect the various module pin function groups as well as general module
placement and mounting. For detailed technical and compliance specifications please refer to
the PW2050 Embedded Device Server Data Sheet.
The table below describes the integration guide sections.
Table 1-1 PW2050 Integration Guide Sections
Section Description
PW2050 Features Provides an overview of the module functions and mechanical drawing
PW2050 Block Diagram Shows the module functional blocks
Signal Descriptions Provides signal descriptions and pinout information
Antenna Interface Lists the antennas pre-certified for use with the module
Antenna Placement Provides a general recommendation for antenna placement
Using the RF1 Signal Pin This section is reserved for a future off module antenna connection option
Serial Interface Provides an example on how to connect the unit to external
RS232/485/422 networks
Ethernet Interface Gives an example on how to connect the module Ethernet
USB Device Port Provides an example on how to connect the unit up as a USB device port
USB Host Port Provides an example on how to connect the module USB host ports
LEDs Describes the module LED connections
General Purpose IO Pins Describes the module GPIO connections
Reset Pins Describes the module RESET, DEFAULT, and WAKE pins
Mounting Instructions and
PCB Footprint
Provides the module PCB footprint and solder profile
Product Information Label Provides an image and description of the unit label contents
Evaluation Board Schematic Provides the PW2050 Evaluation board schematic.