User's Manual
PW2050 Embedded Device Server Integration Guide 9
2: Functional Description
Designed for quick integration with minimal engineering effort, the chip-sized PW2050
embedded device server provides simplicity and flexibility making it the easiest and fastest
networking-enabling module on the market.
PW2050 device servers are extremely compact networking solution that enables Ethernet or
Wireless connectivity on virtually any device with a serial interface. The included industry-
proven Lantronix device server application and full IP stack allow seamless remote access to
device data simplifying design integration while providing robust connectivity.
The PW2050 embedded device servers can be utilized in designs typically intended for chip
solutions. A key difference with the PW2050 module is that there is virtually no need to write a
single line of code, translating to a much lower development cost and faster time-to-market.
Table 2-1 PW2050 Part Numbers
Part Number Description
TBD
PW2050 with on module U.FL— IEEE 802.11 ac/b/g/n Device Server Module, Extended
Temp, Bulk, RoHS
TBD
PW2050 with on module chip antenna— IEEE 802.11 ac/b/g/n Device Server Module,
Extended Temp, Bulk, RoHS
TBD
PW2050 — IEEE 802.11 ac/b/g/n Device Server Development Kit w/ on Module U.FL
and RF Cable to External Antenna, RoHS
TBD
PW2050— IEEE 802.11 ac/b/g/n Device Server Development Kit w/ on Module Chip
Antenna, RoHS
PW2050 Features
The PW2050 device server is built around a 400Mhz ARM9 processor with 32MB of DDR2
DRAM and 128MB of embedded Flash memory. Network connections are provided by a dual
band 802.11 ac/b/g/n WLAN radio and 10/100Mbps Ethernet MAC and PHY.
The PW2050 embedded device server also supports the following:
♦
400Mhz ARM9 CPU
♦
32MB DDR2 DRAM
♦
128MB NAND Flash
♦
802.11AC/BGN wireless with option for on module antenna or on module U.FL
♦
On module 10/100Mbps Ethernet MAC/PHY. External magnetic and RJ45 required.
♦
One USB2.0 High Speed Host/Device interface.
♦
One USB2.0 High Speed Host only port
♦
One USB2.0 Full Speed Host only port
♦
Two 3.3-volt serial interface