User Guide

2. Connect a RJ-45 Ethernet cable between the unit and your Ethernet network.
3. Remove SIM compartment door, secured by two screws. Open SIM slot fastener (sliding
top fastener towards Power connector) and Insert the SIM Card in SIM slot (with contacts
facing toward main board). Close and lock SIM slot fastener (sliding top fastener away
from Power connector). Secure SIM compartment door accordingly and secure with
screws provided. Connect the Antenna to the SMA connector on the side. Do note that
the Safe Distance due to RF exposure from Antenna is 23cm. (Please refer to Figure 3-
11 for SIM card insertion)
4. Plug the PremierWave XC into the power outlet by using the power supply that was
included in the packaging.
5. Power up Serial Devices.
Figure 3-10 PremierWave XC Connections
PremierWave XC User Guide 24