User Guide

Using XML
 Include in your file: <configgroup name="roam">
Network 2 GSM/GPRS Bands Settings
Table 6-6 shows the settings for GSM/GPRS Bands settings.
Table 6-6 Network 2 (wwan0) GSM/GPRS Bands Settings
Network 2 (wwan0)
GSM/GPRS Settings
Description
GSM/GPRS Bands Select the GSM/GPRS Bands if needed
Auto (Default)
GSM-900
GSM-1800
GSM-850
GSM-1900
Note: These bands are the cellular frequencies designated by the ITU of
the operation of GSM mobile phones. Typically Auto should suffice in most
cases and should not be changed unless the unit is unable to determine the
specific band used by your provider.
GSM bands 900 & 1800 are used in most parts of the world, with the
exception of places such as USA, Brazil and Canada where GSM bands
850 & 1900 are used.
After selection, the device will update GSM parameters. Restarting of the
device is required.
To Configure Network 2 GSM/GPRS bands Settings
Using Web Manager
 To modify Network 2 GSM/GPRS band settings, click Network and select Network 2 →
Configuration → GSM/GPRS Band
Using the CLI
 To enter the Network 2 GSM/GPRS command level: enable -> config -> if 2
->link -> gsm gprs band
Using XML
 Include in your file: <configgroup name="gsm gprs band">
PremierWave XC User Guide 41