User Guide

SSH Username
Appears if you selected SSH as the protocol. Enter a username to
select a pre-configured Username/Password/Key (configured on the
SSH: Client Users page), or leave it blank to be prompted for a
username and password at connect time.
Remote Address
Enter an IP address for the host to which the device will connect.
Remote Port
Enter the port on the host to which the device will connect.
To Configure Host Settings
Note: The following section describes the steps to view and configure Host 1 settings;
these steps apply to other host instances of the device.
Using Web Manager
 To configure a particular Host, click Host on the menu bar and select Host 1 ->
Configuration.
Using the CLI
 To enter the Host command level: enable -> config -> host 1
Using XML
 Include in your file: <configgroup name=”host” instance=”1”>
PremierWave XC User Guide 59