User Guide

To Ping a Remote Host
Using Web Manager
 To ping a Remote Host, click Diagnostics in the menu bar and select Ping.
Using the CLI
 To enter the command level: enable
Using XML
 Not applicable.
Traceroute
Here you can trace a packet from the PremierWave XC to an Internet host, showing how many
hops the packet requires to reach the host and how long each hop takes. If you visit a web site
whose pages appear slowly, you can use traceroute to determine where the longest delays are
occurring.
Table 11-11 Traceroute Settings
Diagnostics:
Traceroute Settings
Description
Host
Enter the IP address or DNS hostname. This address is used to show the path
between it and the PremierWave XC when issuing the traceroute command.
To Perform a Traceroute
Using Web Manager
 To perform a Traceroute, click Diagnostics in the menu bar and select Traceroute.
Using the CLI
 To enter the command level: enable
Using XML
 Not applicable.
Log
To Configure the Diagnostic Log Output
Using Web Manager
 To configure the Diagnostic Log output, click Diagnostics in the menu bar and select Log.
PremierWave XC User Guide 78