User Guide

System Settings
The PremierWave XC System settings allow for rebooting the device, restoring factory defaults,
uploading new firmware and updating a system’s short and long name.
Table 11-12 System Settings
System Settings Description
Reboot Device
This reboots the device.
Restore Factory Defaults
This restores the device to the original factory settings. All configuration will
be lost. The PremierWave XC automatically reboots upon setting back to the
defaults.
Upload New Firmware
FTP to the PremierWave. Write the new firmware file to firmware.rom on the
PremierWave. The device automatically reboots upon the installation of new
firmware. See the section, FTP Settings on Page 61.
Short Name
Enter a short name for the system name. A maximum of 32 characters are
allowed.
Long Name
Enter a long name for the system name. A maximum of 64 characters are
allowed.
To Reboot or Restore Factory Defaults
Using Web Manager
 To access the area with options to reboot, restore to factory defaults, upload new firmware,
update the system name (long or short names) or to view the current configuration, click
System in the menu bar.
Using the CLI
 To enter the command level: enable
Using XML
 Include in your file: <configgroup name=”xml import control”>
PremierWave XC User Guide 81