User Guide

Send SNMP Trap
Enable or disable the SNMP Trap
Note: must be configured beforehand.
To Configure Input 1 Settings
Using Web Manager
 To configure Input 1 settings, click Events on the menu bar, and click Input 1.
Using the CLI
 To enter the XML command level: enable -> config -> events -> input 1
Using XML
 Include in your file: <configgroup name=”input 1”> for Input 1 Configuration
 Include in your file: <configgroup name=”input 1 relayoutput”> for Input 1 Relay
Output
 Include in your file: <configgroup name=”input 1 send sms”> for Input 1 Send SMS
 Include in your file: <configgroup name=”input 1 send snmp”> for Input 1 Send
SNMP Trap
To Configure Input 2 Settings
Using Web Manager
 To configure Input 2 settings, click Events on the menu bar, and click Input 2.
Using the CLI
 To enter the XML command level: enable -> config -> events -> input 2
Using XML
 Include in your file: <configgroup name=”input 2”> for Input 2 Configuration
 Include in your file: <configgroup name=”input 2 relayoutput”> for Input 2 Relay
Output
 Include in your file: <configgroup name=”input 2 send sms”> for Input 2 Send SMS
 Include in your file: <configgroup name=”input 2 send snmp”> for Input 2 Send
SNMP Trap
PremierWave XC User Guide 92