User's Manual
Table Of Contents
- PremierWave XC HSPA+ User Guide
- 1: Using This Guide
- 2: Introduction
- 3: Installation of PremierWave XC HSPA+
- 4: Using DeviceInstaller
- 5: Configuration Using Web Manager
- 6: Network Settings
- Network 1 (eth0) Interface Settings
- Network 1 (Link) Settings
- Network 1 (Failover)
- Network 2 (Cellular) Settings
- Network 2 (Link) Settings
- Gateway
- 7: Cellular
- 8: Action Settings
- 9: Line and Tunnel Settings
- Line Settings
- Tunnel Settings
- Serial Settings
- To Configure Tunnel Serial Settings
- Packing Mode
- To Configure Tunnel Packing Mode Settings
- Accept Mode
- To Configure Tunnel Accept Mode Settings
- Connect Mode
- To Configure Tunnel Connect Mode Settings
- Disconnect Mode
- To Configure Tunnel Disconnect Mode Settings
- Modem Emulation
- To Configure Tunnel Modem Emulation Settings
- Relay Output
- 10: Terminal and Host Settings
- 11: Services Settings
- 12: Security Settings
- 13: Maintenance and Diagnostics Settings
- Filesystem Settings
- Protocol Stack Settings
- SMTP Settings
- Diagnostics
- Threads
- Clock
- System Settings
- Discovery and Query Port
- 14: Advanced Settings
- 15: Security in Detail
- 16: Updating Firmware
- 17: Branding the PremierWave XC HSPA+
- Appendix A: Technical Specifications
- Appendix B: Compliance
- Appendix C: Technical Support
- Appendix D: Binary to Hexadecimal Conversions
- Appendix E: USB-CDC-ACM Device Driver File for Windows Hosts
PremierWave XC HSPA+ User Guide 41
7: Cellular
The Cellular page displays the configuration and status for the Cellular module.
To Configure Cellular Settings
Using Web Manager
Click Cellular on the menu.
Using the CLI
To enter the cellular command level: enable -> config -> cellular
Using XML
Include in your file:
<configgroup name = "cellular">
Cellular Settings Description
PIN Lock Enable to prevent unauthorized use of the SIM card.
PIN Enter PIN combination to enable PIN Lock. Caution: If you enter the PIN
incorrectly 3 times, the SIM card will lock, and you will need a PIN Unblocking Key
(PUK) to unlock your SIM card. PUK is required to unlock SIM cards that have
become locked following 3 successive incorrect PIN entries. Caution: If you enter
the PUK incorrectly 10 times, the SIM card will be permanently locked and no
longer operable.
Allowed Bands Select the allowed bands, determining the frequency band usage of the device.
Select/Unselect individual bands to restrict the allowed bands to a specific band or
band combination.
PRELIMINARY DRAFT
PRELIMINARY DRAFT