User Manual

Command Reference Navigation/Help Commands
12-14
Node
Displays information for all queue entries requested from the specified node.
Must be used in conjunction with the nodename parameter.
nodename
Specifies a particular node.
All
Displays information for all ports and nodes.
Note: All is the default setting for Show/Monitor Queue.
Service
Displays information for all queue entries for the local service specified with
the ServiceName parameter.
ServiceName
Specifies a service name of up to 16 characters.
Examples
Local> SHOW QUEUE Port 6
Local> MONITOR QUEUE SERVICE lab5
12.4.15 Show Version
Displays the current version of the SCS software.
See Also Reloading Operational Software, page 2-6
12.4.16 Zero Counters
This command is used to reset the counters for errors and other network and server events.
Restrictions You must be the privileged user to zero some other port (or All).
Parameters All
Zeroes all Ethernet, TCP/IP, SLIP, and serial port counters.
Ethernet
Zeroes only Ethernet counters.
Port
Zeroes only the counters for events associated with a single serial port.
SHOW VERSION
ZERO COUNTERS
ALL
ETHERNET
PORTPortNum