User Manual

Command Reference IP/Network Commands
12-35
12.5.15 Set/Define IP Domain
Sets the default domain suffix. This suffix is appended to host names during IP name resolution.
Restrictions Requires privileged user status.
Parameters DomainName
A string of up to 64 characters.
None
Clears an existing domain suffix.
Defaults None (no domain defined)
Examples
Local>> SET IP DOMAIN your.domain.com
See Also Show/Monitor/List IP, page 12-43; Specifying a Default Domain Name, page
6-7
12.5.16 Set/Define IP Ethernet
See Set/Define IP All/Ethernet, page 12-32.
12.5.17 Set/Define IP Host Limit
Sets the maximum number of TCP/IP hosts that the SCS will add to its host table as a result of Rwho and
DNS lookups. Hosts from the preset host table are exempt from this limit.
Restrictions Requires privileged user status.
Parameters num
An integer between 0 and 200.
None
Clears any current host limit.
Defaults Limit: 200 hosts
See Also Show/Monitor/List IP, page 12-43; Adding Hosts to the Host Table, page 6-7
SET
DEFINE



PROTOCOLS
IP DOMAIN
DomainName
NONE



SET
DEFINE



PROTOCOLS
IP HOST
LIMIT
num
NONE


