User Manual

Command Reference Server Commands
12-122
12.9.12 Set/Define Server Loadhost
Specifies the host to be used for downloads from TCP/IP hosts. The host name must be a numeric IP-style
address. The SCS requests its run-time code from this host.
Restrictions Requires privileged user status.
Parameters IPaddress
An IP address in standard numeric format (for example, 193.0.1.50).
Examples
Local>> DEFINE SERVER LOADHOST 193.23.71.49
See Also Your SCS Installation Guide
12.9.13 Set/Define Server Lock
Controls whether or not local users are permitted to Lock their ports.
Restrictions Requires privileged user status.
Defaults Enabled
See Also Locking a Port, page 8-9
12.9.14 Set/Define Server Login Password
Specifies the password that is used to log in to the server from the serial ports or the network. If the password
is not given on the command line, you will immediately be prompted to enter the password, which will not
be displayed when typed.
The login password is only required on ports that have been Password Enabled.
SET
DEFINE



SERVER
SECONDARY
LOADHOST IPaddress
SET
DEFINE



SERVER LOCK
ENABLED
DISABLED



SET
DEFINE



SERVER LOGIN
PASSWORD password