User Manual

Command Reference Server Commands
12-124
Parameters IPaddress
The network address of the nameserving host, in numeric IP format.
Examples
Local>> SET SERVER NAMESERVER 192.0.1.49
See Also Set/Define IP Host Limit, page 12-35; Set/Define IP Nameserver, page 12-36;
Configuring the Domain Name Service (DNS), page 6-7
12.9.17 Set/Define Server Password Limit
Limits the number of failures allowed when issuing the Set Privileged command, when entering the login
password when logging in to a serial port, or when Set/Define Ports Password Incoming is enabled. After
limit retries, the port will be logged out.
The user can abort the password process by typing Ctrl-Z instead of the password.
Restrictions Requires privileged user status.
This limit does not apply to SSH connections, which always have a password
limit of 3.
Parameters limit
A value between 0 and 100. If zero is specified, the port is never logged out for
too many password failures.
None
Sets the password limit to the default value.
Defaults 3 tries
Examples
Local>> SET SERVER PASSWORD LIMIT 10
See Also Set Privileged/Noprivileged, page 12-84
12.9.18 Set/Define Server Privileged Password
Sets the password for becoming the “superuser” of the server. If the password is not given on the command
line, you will immediately be prompted to enter the password, which will not be displayed when typed.
SET
DEFINE



SERVER PASSWORD
LIMIT
limit
NONE



SET
DEFINE



SERVER PRIVILIGED
PASSWORD
passwd