Computer Drive User Manual

5: Changing the UBox's Settings
UBox User Guide 38
Figure 5-5. Device Configuration Window
The following information displays at the top:
USB Product
Name
Name programmed into the USB device by the
manufacturer.
Vendor ID (VID)
Vendor ID programmed into the USB device by the
manufacturer.
Product ID (PID)
Product ID programmed into the USB device by the
manufacturer.
USB Serial
Number:
Serial number, if any, programmed into the USB device by
the manufacturer.
4. Update the following settings as desired:
Alternate Name
A name for the USB device other than the name
programmed into it by the manufacturer.
The alternate name applies to a specific UBox.
 If you move a USB device to another UBox, reset the
alternate name on the new UBox.
 If your USB Device does not have a serial number,
and you move the USB device to a different port, re-
enter the alternate name.
Requires
Password To
Connect
Select the checkbox to share the specified USB device
only with users who have the password to that USB device.
When you first attempt to connect to a password-protected
USB device, you are prompted to enter a password. You
can then opt to store passwords locally in the Local
Settings tab so that you do not need to reenter the
password every time you want to use that USB device.
Because passwords apply to a specific UBox.
 If you move a USB device to another UBox, reset that
USB device's password on the new UBox.
 If your USB Device does not have a serial number,
and you move the USB device to a different port,
select the Requires Password to Connect checkbox