UDS1100 Quick Start Guide UDS1100 2006 Copyright © Lantronix is a trademark of Lantronix. All rights reserved. 900-418 Rev.
UDS1100 QUICK START CONTENTS What’s In the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 IP Addressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 UDS1100 Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Quick Start Guide UDS1100 WHAT’S IN THE BOX In addition to the UDS, the box contains the following items: POWER SUPPLY (DOMESTIC UNITS) PART # COMPONENT DESCRIPTION 520-079-R Power cube, 110 VAC 500-163 Serial Cable CD Power Cord Restraint The UDS products allow serial devices to connect and communicate over an Ethernet network. This Quick Start explains how to connect, configure, and troubleshoot your unit using a network connection and our DeviceInstaller software.
Quick Start Guide UDS1100 IP ADDRESSING CONNECT Your unit must have a unique IP address on your network. Two ways to assign an IP are described below. Complete the following steps in order. Refer to the numbers in the figure below. 1. Connect a serial device to your unit. 2. Connect an Ethernet cable to the RJ45 port. 3. Supply power to your unit using the power supply that was included in the packaging.
Quick Start Guide UDS1100 ASSIGN IP ADDRESS AND NETWORK CLASS ASSIGN IP ADDRESS CONTINUED… 1. Click the Start button on the Task Bar and select Programs ➜ Lantronix ➜ DeviceInstaller ➜ DeviceInstaller. The DeviceInstaller window displays. 3. Enter the hardware or Ethernet address of the device. The address is on the label on the underside of the unit. 4.
Quick Start Guide UDS1100 ASSIGN IP ADDRESS CONTINUED… ASSIGN IP ADDRESS CONTINUED 5. Enter the IP address, Subnet mask, and Gateway being assigned to the device in XXX.XXX.XXX.XXX format. Click Next. 6. Click the Assign button to finalize the IP assignment. Figure 4. IP Settings 8 Figure 5. Assignment W W W. L A N T R O N I X .
Quick Start Guide UDS1100 ADDING THE UNIT TO THE DEVICE LIST LEDS/TROUBLESHOOT Now add the unit to the list of similar Lantronix devices on the network so that you can manage and configure it. To perform this step, click the Search icon . DeviceInstaller locates the unit and adds it to the list. The unit contains the following LEDs: • Power • 10/100 Mb Link • 10/100 Activity • Diagnostics CONFIGURATION • Status Channel 1 Once the UDS is in the device list, it can be configured. 1.
Quick Start Guide UDS1100 SERIAL LEDS MEANING CONTACT 10/100 Mb Link steady green Valid network connection For questions and technical support, please check our online knowledge base at www.lantronix.