User's Manual
Table Of Contents
- List of Tables
- List of Figures
- Using This Guide
- Introduction
- Quick Start
- Configuration via Serial Mode or Telnet Port
- Configuration using Web-Manager
- Configuration using DeviceInstaller
- Monitoring the Network
- Updating Firmware
- Troubleshooting
Introduction
12 WiBox™ User Guide
Figure 2-1. Serial Tunneling Network Example
In Error! Reference source not found., a PC connected to an AP via an Ethernet
connection and a PC with a wireless connection to the AP access the WiBox as
though they are directly connected to it. The combination of the WiBox, a PC, and
Lantronix’s Redirector behave such that it seems the PC is directly communicating to
the WiBox’s serial devices without the use of the AP. However, communication is
preserved through the AP.
Ad-Hoc Network
Figure 2-2. Ad-Hoc Network Example
In the above example, the AP is not present. The PC makes a direct wireless
connection with the WiBox to manage serial devices. Without an AP, it is a point-to-
point relationship.
Serial Tunneling – Infrastructure