User's Manual
Table Of Contents
- List of Tables
- List of Figures
- Using This Guide
- Introduction
- Quick Start
- Configuration via Serial Mode or Telnet Port
- Configuration using Web-Manager
- Configuration using DeviceInstaller
- Monitoring the Network
- Updating Firmware
- Troubleshooting
Introduction
WiBox™ User Guide 15
Mode window. Ports 0-1024 are reserved as well. For more information on reserved
port numbers, refer to Table 4-5. Reserved Port Numbers.
Serial Connector Pinouts
The two DB9M DTE serial ports provide default settings for RS-232C
communications running at 9600 baud, 8 bits, no parity, and 1 stop bit (9600, 8, N,
1).
Figure 2-5. DB9M DTE Serial Connector
LEDs
Table 2-1. WiBox LEDs
LEDs Meaning
Power LED: Green, steady on Power is on
Wireless Link LED: Yellow, blinking Transmitting/receiving (activity)
Wireless Link LED: Yellow, off Not in wireless mode
Port 1 LED: Green, steady on Active
Port 1 LED: Green, blinking Incoming TCP connection
Port 2 LED: Yellow, steady on Active
Port 2 LED: Yellow, blinking Incoming TCP connection
Technical Specifications
Table 2-2. WiBox Technical Specifications
CPU, Memory
Lantronix DSTni-EX 186 CPU
256 KB zero wait state SRAM
2048 KB Flash
Serial Interface
Rate is software selectable (300 bps to 921600 bps)
Network Interface
Wireless 802.11b