User's Manual

Configuration Using Web-Manager
WiBox™ User Guide 47
Server Configuration
Telnet Password
Enter the password required for Telnet access.
Retype Password
Re-enter the password required for Telnet access.
Advanced
ARP Cache Timeout When the unit communicates with another device on the
network, it adds an entry into its ARP table. ARP Cache
timeout defines the number of seconds (1-600) before it
refreshes this table.
TCP Keepalive TCP Keepalive time defines how many seconds the unit waits
during an inactive connection before checking its status. If the
unit does not receive a response, it drops that connection.
Enter a value between 0 and 60 seconds. 0 disables
keepalive.
Host List Configuration
The host list operates in a sequential order when attempting to connect to the first
available host. The WiBox scrolls through the host list until it connects to a device
listed in the host list table. After a successful connection, the unit stops trying to
connect to any others. If this connection fails, the unit continues to scroll through the
table until the next successful connection.
The host list supports a minimum of 1 and a maximum of 12 entries. Each entry
contains an IP address and a port number.
Note: The host list is disabled for Manual and Modem Mode. The unit will not
accept a data connection from a remote device when the host list option is
enabled.
To configure the WiBox’s host list:
1. From the main menu, click the Hostlist tab.