User's Manual

Configuration Using Web-Manager
WiBox™ User Guide 55
Ad Hoc Network Name
Enter the network name for the Ad Hoc network.
Ad Hoc Network
Channel
Select from the pull down menu the radio channel for the Ad
Hoc network. The default value is 11.
Ad Hoc Country From the pull down menu, select a country for the Ad Hoc
network. The default is United States.
Wireless Network Security
Security As an additional security measure, enable WEP on the WiBox.
By default, WEP is disabled on WiBox.
Authentication Select an authentication scheme from the pull down menu:
None (Open) or Shared. Selecting Shared requires manually
entering the authentication key.
Encryption
Select the encryption type from the pull down menu. 128 bits
is the default encryption.
Encryption Key
Field is enabled when WEP is selected as the Security type.
Enter the Encryption Key in hexadecimal value
Advanced Settings
Data Rate WiBox permits the control of the transmission rate. The data
rate is the WiBox’s bandwidth. If multiple products are used, it
may be required to lower the bandwidth to ensure one product
is not using all the available bandwidth. Select the data rate
(in Mbps) from the pull down menu.
Radio Power
Management
Power management reduces the overall power consumption
of the WiBox unit. Selecting Enable increases the response
time.
Updating Settings
Click the Apply Settings button from the main menu to save and apply the
configuration changes.