User's Manual
Table Of Contents
- List of Tables
- List of Figures
- Using This Guide
- Introduction
- Quick Start
- Configuration via Serial Mode or Telnet Port
- Configuration using Web-Manager
- Configuration using DeviceInstaller
- Monitoring the Network
- Updating Firmware
- Troubleshooting
Contents
6 WiBox™ User Guide
Network Configuration __________________________________________________ 44
Automatic IP Address Configuration ____________________________________________ 45
Static IP Address Configuration ________________________________________________ 45
Server Configuration ___________________________________________________ 46
Host List Configuration__________________________________________________ 47
Channel 1 and Channel 2 Configuration ____________________________________ 48
Serial Settings _____________________________________________________________ 48
Connection Settings - TCP____________________________________________________ 50
Connection Settings - UDP ___________________________________________________ 53
WLAN Configuration ___________________________________________________ 54
Updating Settings______________________________________________________ 55
6: Configuration using DeviceInstaller 2
Accessing WiBox using DeviceInstaller ______________________________________ 2
Server Configuration ____________________________________________________ 2
WLAN Configuration ____________________________________________________ 3
Host List Configuration___________________________________________________ 3
Channel 1 and Channel 2 Configuration _____________________________________ 4
7: Monitoring the Network 9
Entering Monitor Mode via the Serial Port ____________________________________ 9
Entering Monitor Mode via the Network Port __________________________________ 9
Monitor Mode Commands ________________________________________________ 9
8: Updating Firmware 11
Obtaining Firmware ____________________________________________________ 11
Reloading Firmware____________________________________________________ 11
Using TFTP: Graphical User Interface (GUI) ______________________________________ 11
Using TFTP: Command Line Interface___________________________________________ 12
Recovering the Firmware Using the Serial Port ____________________________________ 12
9: Troubleshooting 13
Problems and Error Messages ___________________________________________ 13
Technical Support _____________________________________________________ 16
A: Compliance and Warranty Information 17
Compliance Information _________________________________________________ 17
Warranty ____________________________________________________________ 18