User's Manual

WiBox™ User Guide 9
1
1
:
:
U
U
s
s
i
i
n
n
g
g
T
T
h
h
i
i
s
s
G
G
u
u
i
i
d
d
e
e
Purpose and Audience
This guide provides the information needed to configure, use and update the WiBox
and is intended for network administrators, system integrators, and those responsible
for installation and maintaining the WiBox.
Chapter Summary
The remaining chapters in this guide include:
2:Introduction
Describes the main features of the WiBox and the protocols it
supports.
3:Quick Start Describes the steps to the physical installation of the WiBox.
4:Configuration via Serial Mode
or Telnet Port
Provides instructions for accessing Setup Mode (command line
interface) using a Telnet connection through the network or a
terminal or terminal emulation program through the serial port.
Details the parameters that you must configure.
5:Configuration using Web-
Manager
Details configuration using the Web-Manager to set parameters
such as port and server properties.
6:Configuration using
DeviceInstaller
Provides information for configuring the WiBox using
DeviceInstaller.
Error! Reference source not
found.Error! Reference
source not found.
Illustrates various common configurations and applications for the
WiBox.
7:Monitoring the Network
Provides instructions for accessing and using the command line
interface for monitoring the network and diagnosing problems.
8:Updating Firmware
Provides instructions for obtaining the latest firmware and updating
the WiBox.
9:Troubleshooting
Describes common problems and error messages and how to
contact Lantronix Technical Support.