XPress-Pro SW 52000 User Guide Part Number 900-509 Revision A May 2007
Copyright & Trademark © 2005, Lantronix. All rights reserved. No part of the contents of this book may be transmitted or reproduced in any form or by any means without the written permission of Lantronix. Printed in the United States of America. Ethernet is a trademark of XEROX Corporation. UNIX is a registered trademark of The Open Group. Windows 95, Windows 98, Windows 2000, and Windows NT are trademarks of Microsoft Corp. Netscape is a trademark of Netscape Communications Corporation.
Contents 1: Preface 5 Plug-and-Play Solution _______________________________________________ 5 2: Product Overview 6 Hardened Compact Switch ____________________________________________ 6 Package Contents ___________________________________________________ 6 Product Highlights ___________________________________________________ 7 Front Panel Display __________________________________________________ 7 cPower Status (PWR) ____________________________________________________ 8 dPort Status LEDs________
1: Preface A member of the growing family of rugged switches, this switch addresses a need for a smaller switch. This switch provides an affordable solution for rugged and outdoor environment, transportation road-side cabinet, industrial floor shop, multitenant dwellings or Fiber To The Home (FTTH) applications. Capable of operating at temperature extremes of -10°C to +60°C, this is the switch of choice for harsh environments constrained by space.
2: Product Overview Hardened Compact Switch Package Contents When you unpack the product package, you shall find the items listed below. Please inspect the contents, and report any apparent damage or missing items immediately to your authorized reseller.
2: Product Overview Product Highlights Basic Features 5-port 10/100Base-TX or 4-port 10/100Base-TX plus 1-port 100Base-FX. Available in media converter format with 1-port 10/100Base-TX and 1-port 100Base-FX. Support IEEE802.3/802.3u/802.3X. Auto-negotiation: 10/100Mbps, Full/half-duplex; Auto MDI/MDIX. Support 2K MAC addresses. Store-and-forward mechanism. Full wire-speed forwarding rate and non-blocking mechanism. Broadcast storm filtering. Operating voltage and Max.
2: Product Overview cPower Status (PWR) This LED comes on when the switch is properly connected to power and turned on. dPort Status LEDs The LEDs display status for each respective port. LED State Indication 10/100TX or 100FX LNK/ACT (Green) Steady Flashing 100 Steady (Yellow) Off A valid network connection established. LNK stands for LINK. Transmitting or receiving data. ACT stands for ACTIVITY. Light solid yellow for a port transferring at 100Mbps.
3: Installation This chapter gives step-by-step instructions about how to install the switch: Selecting a Site for the Switch As with any electric device, you should place the switch where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you select should meet the following requirements: The ambient temperature should be between -10 to 60 degrees Celsius. The relative humidity should be less than 90 percent, non-condensing.
3: Installation Connecting to Power DC Terminal Block Power Inputs 1. Connect the DC power cord to the plug-able terminal block on the switch, and then plug it into a standard DC outlet. 2. Disconnect the power cord if you want to shut down the switch.
3: Installation Connecting to Your Network Cable Type & Length It is necessary to follow the cable specifications below when connecting the switch to your network. Use appropriate cables that meet your speed and cabling requirements. Speed Connector Port Speed Half/Full Duplex Cable Max. Distance 10BaseT 100BaseTX 100BaseFX 100BaseFX RJ-45 RJ-45 SC, ST SC, ST 10/20 Mbps 100/200 Mbps 100/200 Mbps 100/200 Mbps 2-pair UTP/STP Cat. 3, 4, 5 2-pair UTP/STP Cat. 5 MMF (50 or 62.
A: Specifications and Standards Table Specification Hardened Compact Switch Applicable Standards 10/100BaseT/TX auto-negotiating ports with RJ-45 connectors, 100BaseFX fiber ports IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX/FX Store-and-Forward Switching Method Forwarding Rate 10BaseT: 100BaseTX/FX: Performance Cable 10BaseT: 100BaseTX: 100BaseFX: LED Indicators Dimensions Net Weight Power Operating Voltage & Max.
B: Connector Pinouts Pin Arrangement of RJ45 Connectors: The following table lists the pinout of 10/100BaseT/TX ports.
