User's Manual

Chapter 5: Using DeviceInstaller
XPress DR+ User Guide 45
Setting Description
Supports Dynamic IP
Non-configurable field. Indicates whether the current IP
address on the XPress DR+ was set manually or assigned
automatically.
DHCP
Non-configurable field that displays only if the unit supports
Dynamic IP. True indicates that the IP address can be
assigned automatically by DHCP.
BOOTP
Non-configurable field that displays only if the unit supports
Dynamic IP. True indicates that the IP address can be
assigned automatically by BOOTP.
RARP
Non-configurable field that displays only if the unit supports
Dynamic IP. True indicates that the IP address can be
assigned automatically by RARP.
Subnet Mask
Non-configurable field. Displays the unit's current subnet
mask. To change the subnet mask, see Assigning an IP
Address on page 42.
Gateway
Non-configurable field. Displays the unit's current gateway. To
change the gateway, see Assigning an IP Address on page
42.
Number of Ports
Non-configurable field. Displays the number of ports on the
XPress DR+.
TCP Keepalive
Non-configurable field. Displays the unit's TCP keepalive
value. The value is in the range 1-65s, and the default setting
is 45.
Supports Configurable
Pins
Non-configurable field. Displays False, indicating configurable
pins are not available on the XPress DR+.
Supports Email Triggers Non-configurable field. Displays False.
Supports AES Data
Stream
Non-configurable field. Displays False.
Supports 485 Non-configurable field. Displays True. XPress DR+ supports
the RS-485 protocol.
Supports 920K Baudrate Non-configurable field. Displays False. XPress DR+ supports
baud rates up to a maximum of 230 Kbaud.
Supports HTTP Server Non-configurable field. Displays True.
Supports HTTP Setup Non-configurable field. Displays True.
Supports 230K Baud
Rate
Non-configurable field. XPress DR+ supports a baud rate of
230 Kbaud. Displays True.
Supports GPIO Non-configurable field. Displays False.