User's Manual

3
Pair the device with a compatible phone
1. make sure your device is switched off
2. press and hold the "MFB" until the blue and red light flashes alternately and
there is a tone prompt. The device is now in pairing state.
3. Activate the Bluetooth feature on the phone, and set the phone to search
for Bluetooth devices. See the user guide of your phone for instructions.
4. Select the device (BCK08A) from the list of found devices.
5. Enter the pass code 0000 to pair and connect the device to your phone. In
some phones you may need to make the connection separately after
pairing. See the user guide of your phone for details. You only need to pair
the device with your phone once.
If the pairing is successful, the device’s blue light will flash 3 times briefly. The
device’s name appears in the phone menu where you can view the currently
paired Bluetooth devices.
Basic use
Call handling
To make a call, use your phone in the normal way when the device is
connected to your phone. And the blue LED will flash during the call.
To answer a call, press the “MFB” and the blue LED will flash during the call.
To reject a call, press the “MFB” for 2 second and there is a tone prompt when
there is incoming call.
To end a call, press the “MFB” one time
In standby state, press the volume + key for 2 seconds to redial last dialed
telephone No. This function requires your phone supports redialing.
In standby state, press the “MFB” to start voice dialing. This function requires
your mobile support voice dialing. Check the user manual of your mobile for
details.
Adjust the volume