User Manual

ManualsBrandsLANYA ELECTRONIC ManualsAudio EquipmentBluetooth Headset

User manual

BH701 Bluetooth Headset

1. Overview

The headset contains the following parts as shown in the figure:

Answer/end key (1)

Indicator light (2)

Volume key (3)

Microphone (4)

Earphone (5)

Charger connector (6)

Before you start using the headset, you must charge the battery and pair the headset

with a compatible phone.

2. Charging the headset

This device has an internal, rechargeable battery which must be fully charged before

used for the first time. It takes you about 2 hours to charge the battery full for the first

time. During charging, the indicator shows a steady red. When the battery is fully

charged, the red light will turn off. For the later on charging, it takes about 90

minutes.

You can charge the headset either by using the AC travel charger, USB charging cable

or the car charger depending on the package accessories available. Please check your

package for details. BH701 is intended for use with the chargers that is included in the

package.

The fully charged battery has power for up to 4 hours of talking time or up to 100

hours of standby time.

When the battery is running out of power, the red indicator light starts to flash once

every 15 seconds with buzzer reminder voice. This indicates that the headset needs to

be charged as soon as possible.

(6)

(1)

(5)

(4)

(3)

(2)

Summary of content (4 pages)

PAGE 1
User manual BH701 Bluetooth Headset 1. Overview The headset contains the following parts as shown in the figure: (3) (6) (1) (5) 1 (2) (4) Answer/end key (1) Indicator light (2) Volume key (3) Microphone (4) Earphone (5) Charger connector (6) Before you start using the headset, you must charge the battery and pair the headset with a compatible phone. 2. Charging the headset This device has an internal, rechargeable battery which must be fully charged before used for the first time.
PAGE 2
3. Switch on or off the headset To switch on, when BH701 is in off state, press and hold the answer/end key for 4 seconds until the blue indicator light starts to flash for 3 times To switch off, when BH701 is in on state, press and hold the answer/end key for 4 seconds until the red indicator light flashes for 3 times. 4. Pair the headset with a compatible phone Pairing is the process of establishing encrypted link between BH709 and Bluetooth devices.
PAGE 3
5. Basic use 5.1 Make a call To make a call, use your phone in the normal way when the headset is connected to your phone. The sound will be transmitted to the headset automatically. 5.2 Answer a call When there is incoming call, press the answer/end key, or use the phone keys to answer the call. 5.3 End a call After finishing the call, press the answer/end key, or use the phone keys to end the call. 5.
PAGE 4
6. LED Indication Headset status In idle state after paired In coming call Low battery LED Indication Blue light flashes 1 time every 3 seconds Blue light flashes twice every 2 seconds Red light flashes 1 time every 15 seconds and there is beep sound 7. Specification * Bluetooth Specification v2.1 * Supports Bluetooth Headset and Hands-free Profile * RF Frequency Range: 2.402-2.480GHZ, 2.