User Manual

5. Basic use
5.1 Make a call
To make a call, use your phone in the normal way when the headset is connected to
your phone. The sound will be transmitted to the headset automatically.
5.2 Answer a call
When there is incoming call, press the answer/end key, or use the phone keys to
answer the call.
5.3 End a call
After finishing the call, press the answer/end key, or use the phone keys to end the
call.
5.4 Refuse a call
When there is incoming call, press and hold answer/end button for 3 seconds until you
can hear beep sound from the headset.
5.5 Voice dialing (dialing a number by saying a name)
It is possible to make a call directly from the headset using voice recognition. To use
this voice dialing function, your mobile phone must provide this option and
corresponding voice samples must have been recorded.
Step-1 Enable voice recognition function of your mobile and set the mobile to
handsfree state.
Step-2 When no call is in progress, short press the answer/end button, then you can
hear beep sound from the headset.
Step-3 Speak out the name of the person you wish to call loudly.
5.6 Redail
Press + key 3 seconds, and you can hear beep sound from the headset. Release the
button and the headset will dial the last dialed telephone number.
7.7 Microphone Mute
While talking using the headset, press and hold the Volume – button for 3 seconds to
mute the microphone. Press it again to activate the headset microphone.
5.7 Adjust the earphone volume
Press the volume + key to increase or - to decrease the volume during a call.
5.8 Switch the call between mobile and headset
In call state, press and hold the answer/end key for about 3 seconds until there is beep
sound from headset. The call will be switched from headset to mobile or vice versa.
Note for Multi-link use: When the first phone (AG1) under making a call, another
calling into from the second phone which is also connected with the Bluetooth
headsest, press volume+ for 1.5 seconds will answer the call in from the second phone
(AG2), and will hold for the AG1’s calling. press volume+ for 1.5 seconds will switch
the calling between two phones. Short press the answer/end key will end the call of
talking, meantime will connect to the hold phone.( some phone will asking if you
want to connect the phone or not ), press again the answer/end key will ending the call
of talking.