SD82 Instruction Manual Fully Compatible to the Formats of Files Such as DVD, VCD, JPEG, MP4, MP3, MWA, CD. 2 IN 1 CAR AUDIO SYSTEM WITH DVD.VCD.JPEG.MP4.MP3.WMA.CD DISC PLAYER AND AM/FM STEREO DIGITAL TUNING RADIO Remark: Any information subject to change without further notice WWW. LANZAR.
Contents 1. Before Operation..........................................................................................2 1.1 Glossary........................................................................................ ....... 2 1.2 Precautions and Maintenance.................................................................2 1.3 Maintenance and Cleaning of Discs.........................................................3 1.4 Battery Information of Remote Control..............................................
7. Specification 1. Before Operation General Specification Power Requirement.............................................................DC 12V Maximum Power Output...................4 x 80W(measured at DC 14.4 V) Dimensions(w x h x d)............................................178 x 50 x 165mm 1.1 Glossary DVD Deck Specification Format....................................DVD/VCD/JPEG/MP4/MP3/MWA/CD Video System............................................PAL/PAL 60/NTSC/AUTO Audio System.................
1.3 Maintenance and Cleaning of Discs 6. Trouble Shooting Disc Maintenance 1. To keep the disc clean, handle the disc by its edge, do not touch the disc surface of the play side. 2. Do not stick paper or tape on the disc. If there is glue (or analog) on the disc surface, must wipe it up before using. 3. Do not expose the disc to direct sunlight, or nearby heat sources such as caliduct, or leave it in a car parked in direct sunlight where there can be a considerable rise in temperature. 4.
1.5 Remote Control Description 5.21 Region Code 3 31 39 POWER LOC SETUP 1 1. MODE BUTTON Q: Not begin to playback but to display REGION ERROR after inserting disc into disc compartment. Why ? A: Because the DVD player and disc has respective region code. If the region codes of them are not match with each other, the DVD player can not play the disc.
5.20 Parental Control 1.6 Description of Face of Front Panel Q:After inserting DVD disc into disc compartment, it will appear a dialogue window that ask me input a password of 4 digit. Why ? A:This is because that the disc movie you are playing was rated with the Parental Control, and the current rating level of DVD player is lower than one of current disc. You must input right password and enter it to entry Parental Control setup menu and then set a equal or higher rating level than one of current disc.
1.7 Description of Unit Chassis Face D. Preference Page EJ Audio Subtitle Disc Menu Parental Angle Mark Default 1 AUDIO This item is for selecting an audio language. SUBTITLE This item is for selecting a subtitle language or turn off the subtitle language. DISC MENU This item is for selecting a disc menu language. 2 3 1.LED indicator: Flashing when detachable panel is removed. 2.RESET button: Press it to rehabilitate the distorted program to zero. 3.
DOWNMIX It is for selecting your desired sound effect when there is not central speaker and sub-woofer. There are 2 modes: LT/RT, STEREO. LT/RT: When playing a disc with PRO LOGIC Dolby stereo effect, choose the item, so it will output audio signal with vivid theatre effect. STEREO: If you choose the item, when outputting audio signal with 5.1 channels, it will output the left and right channels of signal ; when outputting audio signal with 2 channels, it will output the common 2 channels of stereo signal.
If your TV set has only NTSC or PAL Type, the screen will blink and become colorless when a wrong TV Type is selected. In this case, press the N/P button on the Remote Control to switch the right TV Type to match the TV color system. TV Display The setup item is for matching the TV screen size. 4:3 PS: Choose the item when connecting a TV set with 4:3 screen. When playing the pictures with 16:9 size, the left and right parts of the video will be cut out, and display in full screen.
1.11 INSTALLATION 5.19 System Setup Menu Operation 1. Press SETUP button on the IR remote control to display System Settings Main Menu on the TV screen. The System Setting Main Menu consist of 4 parts, i.e. 4 sub-menu. From left side to right side, they are General Setup Page, Speaker Setup Page, Video Setup Page and Preference Page. INSTALLATION INSTRUCTIONS IT I S AN ANTI-THEFT INSTALLATION WAY. THE CHASSIS WEAR A ME TAL SLIDING HOUSING.
2. Common Operation 3. During JPEG playback, press one of the >/< buttons to change the angle of viewing picture that is displaying as follows: >: 90 deg cw; <: 90deg ccw During JPEG playback, press the STOP or MENU button to stop playing and return to the root menu. * During JPEG playback, the following buttons are not available: SLOW-FWD, SUBTITLE, TITLE, ANGLE, STEP, OSD, RETURN, RDM, PROGRAM, ZOOM, AUDIO, CLEAR,PBC, INT and A-B. * In JPEG mode,the other operations are same as ones in MP3/WMA mode.
5.12 Change Audio Language 3. Radio Operation 1. PRESET STATION [ 1-6 ] BUTTONS A]. To memorize the current frequency, press any one of the six preset buttons(1-6) on the front panel or on the remote control hold for more than 2 seconds. B]. To recall the preset memory, press one of the preset buttons [1-6]. 2.
2 Use number button to input desired sequence number of title/chapter/ track with desired sequence. 3 Use direction button to move cursor onto START item, then press PLAY /PAUSE button toplay the programmed tracks in programmed order. 4 To exit program playback, firstly press PROGRAM button to enter program interface again.
4. Basic Disc USB MMC/SD Operation 4.1 Begin playback 1. Press POWER button to turn on the DVD player. After turning on the DVD player, please turn on TV set, and ensure that the video output of TV is the video input from the DVD player connected with TV set.
5.4 Playback Repeatedly 4.2 Pause Playback 5.4.1 ONE/ALL Repeat 1. Under mode of DVD disc playback: Press the REPEAT button on the IR remote control or the 2RPT button on the front panel to select Repeat Chapter, Repeat Title, Repeat All or Repeat Off. 2 .
1).When it is in the state of PBC ON and display the PBC menu on the TV screen if the disc include PBC menu, press one(s) of NUMBER buttons to select the track/chapter to playback; During playing, the NUMBER buttons are not available. 2).When it is in the state of PBC OFF, press one(s) of the NUMBER buttons to select the chapter/track to playback. * To select one track of the 1st-9th tracks to play, should input 0 number firstly, then input the serial number. 2.