SDINBT75 PRECAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Contents 1. Before Operation...........................................................................................3 1.1 Glossary................................................................................................ 3 1.2 Precautions............................................................................................3 1.3 Maintenance and Cleaning of Discs..........................................................4 1.4 Battery Information of the Remote Control.............................
1. Before Operation 1.1 Glossary PBC (playback control) It is a kind of signal(menu) recorded in the disc with SVCD or VCD2.0 format used for the playback control. For the discs containing PBC, It can playback interactive software with the menu displayed on monitor screen. If the disc contain still images, it can playback high definition of still images. Title Generally, the title is the important part of DVD disc.
1.3 Maintenance and Cleaning of Discs Disc Maintenance 1. To keep the disc clean, handle the disc by its edge, do not touch the disc surface of the play side. 2. Do not stick paper or tape on the disc. If there is anything on the disc surface, wipe it up with a soft cloth before using. 3. Do not expose the disc to direct sunlight, or nearby heat sources such as caliduct, or leave it in a car parked in direct sunlight where there can be a considerable rise in temperature. 4.
1.5 The Remote Control Description 3 27 PWR OPEN P/ N EQ BAND 14 35 1 4 2 29 MU MOD E MENU 33 32 6 0K SEL 9 34 8 + SETU P 13 CLEAR 31 30 24 28 21 22 10 3 4 6 7 8 9 0/10 10+ 1 2 -10 +10 5 CLK SLOW_FWD LOC ST ZOOM SEAR CH AP S 12 16 18 17 INT RPT RDM AUDIO TITLE/PBC SUBTITLE PAIR REDIAL 19 TEL 39 A-B 23 20 PROG 36 11 15 # 26 25 5 7 OSD LOUD 37 38 16. SEARCH BUTTON 17. RDM BUTTON 18. RPT BUTTON 19. SUBTITLE/REDIAL BUTTON 20.
1.6 The Locations and Names of Controls on or in the unit 8 1 18 10 5 22 3 20 OPEN MODE BAND USB MIC AV IN MU TE APS 2 23 19 11 1 9 24 12 INT RPT RDM -10 +10 2 3 4 5 6 15 16 13 14 REL 17 4 25 6 The Front Panel SD/MMC 7 21 The Front Facet after removing the front panel 1. OPEN button 2. POWER/MUTE button 3. Monitor 4. AUX socket 5. Disc Slot 6. USB Jack 7. SD/MMC Card Slot 8. MODE button 9. VOL knob 10. >>| button 11. |<< button 12. PLAY/PAUSE/1 button 13.
1.7 Wires Connection Description The Description of the Wires Connection Fixing Screw Bolt Wiring Connecting Socket 2 Black Wiring Connecting Socket 1 Radio A ntenna jack Black 1. Parking wire must be connected. And the parking brake must be engaged in order for the monitor to work. 2. Use the clip end of the Ground Wire provided by manufacturer to connect Mounting Screw, using the other end of the Ground Wire to connect the negative pole of the power source.
Description of Connecting the Parking Brake Line to the Parking Brake System Built in the Car Parking brake Ground(-)/Park Break(Coffee) Parking brake switch (inside the car) To metallic body or chassis of the car NOTE: after connecting the Parking Line, the video on the small monitor of the front panel will be display only after braking the car. 1.8 UNIT INSTALLATION INSTALLATION INSTRUCTIO NS THE UNIT IS INSTALLED TO BE AN ANTI-THEFT ONE. THE CHASSIS OF THE UNIT WEARS A SLIDING METAL HOUSING.
2. Common Operation 1. To turn on/off the unit In power off mode, short press the POWER button to turn on the unit. In power on mode, long press the POWER button on the front panel or short press the POWER button on the remote control to turn off the unit. 2.
.To do general setup To do general setup, first pop up Mode Menu as in item 3, then tap the icon in the Mode Menu to pop up GENERAL SETUP interface as right. In the interface, select one of CLOCK SET, RDS MODE , OSD LANG, RADIO FREQ and SENSE SET on the left side by tapping them, then set them by tapping some icons on the right side accordingly. * SENSE SET is used to set the sensitivity of stopping auto searching for an available radio station. When you tap it, it will ask you to input a password.
4. APS BUTTON In RADIO mode: 1) When long pressing the APS button, the radio searches from the lowest frequency and checks the signal strength level until 1 cycle search is finished. And then the 6 strongest stations are preset to the corresponding preset number memory bank. The AS operation is implemented in the each bank of the selected band. When the AS operation is finished, it will scan each preset station for 5 seconds in FM or AM band from M1 as briefly pressing APS button.
(remove the front panel to insert SD/MMC card). To remove the USB in the USB jack, press the STOP button twice and then remove the USB. To remove the SD/MMC card from the SD/MMC card slot, press the STOP button twice and then push in the card and then pull it out of the Card Slot. * It supports version 1.1/2.0 USB and 8 GB SD CARD. Remark: If the disc, USB or SD/MMC card includes folder(for MP3/WMA/MP4/JPEG files), after loading, it will display a root as the right image.
4.2 Pause Playback In the state of DVD/VCD/CD/MP3/WMA playing, press the PAUSE button on IR remote control to pause the playback, press the PLAY button to resume normal playback. 4.3 Stop Playback In the state of DVD/VCD/MP3/WMA/CD playing, press the STOP button once to pause the playback, then press the PLAY button to resume the normal playback; press the STOP button twice to full stop the playback, then press the PLAY button to start playing from the beginning of the first chapter/track. 4.
In VCD mode 1. When starting to turn on the PBC function, it will play from the beginning of the disc till it display the PBC menu on the screen if the disc include the PBC menu. 2. Press the number buttons to select your desired track to play. In MP3/WMA mode 1. The root menu is displayed on the monitor screen all the time(and the TITLE or MENU button is not available). 2.
2. In the mode of VCD(PBC OFF)/CD playback: press the RPT button to select REP ONE, REP ALL or OFF. When it is in the state of PBC ON, during VCD disc playing, the RPT button are not available. 3. In the mode of MP3/WMA playback: Press the RPT button to select REP ONE, REP DIR, REP ALL or OFF. 4.10.2 A-B Repeat Press the A-B button if you want to repeat a specific segment on a disc that you define: 1. Press the A-B button at a point (A) where you want it to be the start point of the repeat segment.
4.13 Playback in Random In the state of DVD/VCD(PBC OFF)/MP3/WMA/CD playing, press the RDM button to switch between RANDOM (ON)/RANDOM OFF. When in RANDOM (ON) mode, it will play in random. 4.14 Playback in Zoom Mode In video/image mode, during playback, press the ZOOM button continuously to enlarge a certain area of the images on the screen with these multiples: ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/2,ZOOMx1/3,ZOOMx1/4,ZOOM OFF. Press one of the ^/v/>/< buttons to select the area you want to enlarge. 4.
3. In the state of MP3/WMA playing, press the OSD button repeatedly on the remote control to turn on/off the playback status. When it is on, it will display the information such as: the serial number of the playing track, the elapsed time of the playing track, the remained time of the playing track. 4.19 Program Playback It allows you to enter the order in which you want some chapters/tracks in DVD/VCD/MP3/WMA/CD to play.
3. During JPEG playback, press one of the >/: 90 deg cw; <: 90deg ccw; ^:UP<-->DOWN; v: LEFT<-->RIGHT During JPEG playback, press the PROG button to change the mode of refresh picture. During JPEG playback, press the STOP button to stop playing and return to the root menu. * * During JPEG playback, the following buttons are not available: SLOW-FWD, SUBTITLE, TITLE, ANGLE, AUDIO, RDM, INT and A-B.
* * Press the < button to return to the previous level. Press the SETUP button again or use the direction buttons to highlight EXIT SETUP and then press the OK button to exit the Setup Menu. For the DVD System Menu, there are 6 setup pages in all. They display as follows: 4.23.1 SYSTEM SETUP TV SYSTEM This product supports output of various TV system. If your TV set has only NTSC or PAL system, the screen will blink and become colorless when a wrong TV system is selected.
4.23.2 LANGUAGE SETUP OSD LANGUAGE This item is for selecting the language of the SYSTEM MENU and all operating prompt interface displayed during playback. AUDIO LANG This item is for selecting a audio language. SUBTITLE LANG This item is for selecting a subtitle language. MENU LANG This item is for selecting a disc menu language. 4.23.3 AUDIO SETUP AUDIO OUT There is only ANALOG mode, i.e. SPDIF/OFF, not optional. KEY It is for selecting your desired basic music tone(from low to high). 4.23.
HUE It is for adjusting the hue of the video output. SATURATION It is for adjusting the saturation of the video output. SHARPNESS It is for adjusting the sharpness of the video output. 4.23.5 SPEAKER SETUP DOWNMIX It is for selecting your desired sound effect when there is not central speaker and sub-woofer. There are 3 mode: LT/RT, STEREO, VSS. LT/RT: When playing a disc with PRO LOGIC Dolby stereo effect, choose the item, so it will output audio signal with vivid theatre effect.
* The Region Code Q: Not begin to playback but to display REGION ERROR after inserting disc into disc compartment. Why ? A: Because the DVD player and disc has respective region code. If the region codes of them are not match with each other, the DVD player can not play the disc. Appendix: The region code of DVD: The Motion Picture Association of America (MPAA) divided the world into 6 regions, and named every region a code, namely region code.
5. BLUE TOOTH HANDFREE SYSTEM 1. Enter Bluetooth mode When you use MODE button or Mode Menu to enter Bluetooth mode, it will display Bluetooth interface as right. Bluetooth interface In Bluetooth interface, the icons descriptions are as follows: : Tapping it can pop up AUDIO & VIDEO SETUP interface as one in page 10. : Tapping it can transfer audio between the Car Audio System and mobile phone. : Tapping it can exit to Mode Menu. : Same as CLEAR button in Remote Control.
4. In the connection status: the audio of mobile phone transfers to the car audio system whenever a dialling takes place or receiving a call. 5. Dialling when in connection status 5.1 Dial with the mobile phone directly. 5.2 Dial with remote control with the following procedures: (1) Input telephone number with number buttons 0-9 * (2) Short press CLEAR button to cancel the wrongly input number if necessary Short press TEL to execute the dialling. 5.
6. The Trouble Shooting Please read the user's manual carefully before using the DVD player. If you have any troubles in using this player, try to solve the problems by the suggestions mentioned below. If you can not remove the trouble after using all the suggestions, please contact the company or the technical service center authorized by us. For the sake of your safety, please do not open the cover and repair the player by yourself, if that, it may cause electric shock.
* Replace another disc to insert it into the disc compartment. REMOTE CONTROL IS INSENSITIVE OR DOES NOT WORK * Check the batteries of remote control and make sure that they are to be powerful and good conductivity. * Direct the remote control to the IR sensor of the player. * Check whether there are some obstacles between the remote control and IR sensor. SOME FUNCTION BUTTONS DO NOT WORK * Turn off the power, then turn on again. * Reset the unit to zero, then turn on again.
7. Specification General Specification Power Supply Requirement..................................................DC 12V Maximum Power Output............4 x 80W(measured at DC 14.4 V) Dimensions(w x h x d).....................................178 x 50 x 160mm DVD Deck Specification Format.....................................DVD/VCD/JPEG/MP4/MP3/WMA/CD Video System....................NTSC/PAL/PAL-M/PAL-N/AUTO(optional) Audio System..............................................................