Operation Manual

4. In the connection status: the audio of mobile phone transfers to the car audio system
whenever a dialling takes place or receiving a call.
5. Dialling when in connection status
5.1 Dial with the mobile phone directly.
5.2 Dial with remote control with the following procedures:
(1) Input telephone number with number buttons 0-9
* Short press CLEAR button to cancel the wrongly input number if necessary
(2) Short press TEL to execute the dialling.
5.3 To redial the last phone number dialled
Short press REDIAL button or tap the icon, It will dial the last phone number.
6. Accept/Reject/End Call
6.1 During ringing, short press TEL button to accept the call
6.2 During ringing, short press HANG UP button to reject the call
6.3 During talking, short press HANG UP button to end the call
Note: During ringing, the phone number appears.
7. To transfer the audio of a file played by Mobile Phone to the Car Audio Player
In the connection status between the Bluetooth devices of the Car Audio Player
and a Mobile Phone, if the mobile phone can play audio or video files and support
A2DP, when the Mobile Phone plays an audio or video file(For some Mobile Phones,
you must select Play by BT firstly), the audio of the playing file will be transferred
to the Car Audio Player.
In A2DP mode, if the Bluetooth device of the Mobile Phone support AVRCP, the
functions of the >>|, |<< , PLAY/PAUSE , EJECT, MUTE, EQ, LOUD, + , - and SEL
buttons are the same as one in media mode(no fast forward/backward functions for
the >>|/|<< buttons). The other buttons available in media mode are not available.
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com