Use Instructions

14
Initial Device Startup
en
4 Initial Device Startup
WARNING!
The product may be used only by doctors or health care professional in accor-
dance with the intended use. Personnel must have training that qualifies them
to operate laparoscopy pumps. In addition, personnel must read the user manual
and operating instructions and become familiar with handling the device before
first use. Personnel must have mastered handling and operation of the product
before first use during a surgery. This user manual does not include descriptions
or instructions for surgical procedures/techniques. It is also not intended to in-
troduce to or train physicians in the use of surgical techniques.
4.1 Scope of Delivery
• Device LAP-Pump
• Instructions for Use
• Power cord
Delivery inspection Always check all parts and optional accessories of the device immediately after
receiving the shipment. The manufacturer considers only replacement claims
that have been immediately submitted or reported to a sales representative or an
authorized service company.
Returning the device If it becomes necessary to return the device, always use the original packaging.
The manufacturer does not take responsibility for damage that has occurred dur-
ing transportation if the damage was caused by inadequate transport packaging.
When returning the device please make sure that all the required information
has been supplied:
•Name of owner
•Address of owner
• Device type and model
• Serial number of the equipment (see identification plate)
• Detailed description of defect
Use the return shipping form included in Chapter 16.2 Return Form.
4.2 Setting up and Connecting the Device
NOTE!
Locations
The device may be used only in the hospital or operating rooms.
Setting up Place the device on a flat surface free of vibration located in a dry environment.
The ambient temperature and humidity must meet the requirements mentioned
in Chapter 11 "Technical Data".
WARNING!
ME System (Medical Electrical System)
Use only parts and/or devices from ME systems (see Chapter 15 Glossary) in pa-
tient environments in compliance with the standard IEC60601-1 in the respec-
tive currently valid version.