Use Instructions

20
Operating the Device
en
5.5 Inserting a Standard Tube Set
The standard tube set is available as a disposable or reusable tube set (autoclav-
able) (see chapter 12 Accessory List).
The tube set consists of 3 tube components, (irrigation tube (5), roller tube (7),
and instrument tube (9)), a Y-connector (4) and 2 tap spikes (2). The tap spikes
(2) are used to connect the tube components with the fluid bags.
The Luer lock connector (10) connects the instrument tube with the instrument.
WARNING!
Do not touch patient and the ON/OFF switch at the same time.
In order to separate sterile from non-sterile areas, assign the following tasks to
the "sterile" or "non-sterile" nurse or medical technician. The indicated numbers
Fig. 5-3 Tube set elements
(1) Protective caps
(2) Tap spikes
(3) Tube clamps
(4) Y-connector
(5) Irrigation tube
(6) Ring
(7) Roller tube
(8) Pressure chamber with mem-
brane and transponder
(9) Instrument tube
(10) Luer lock connector
(2)
(6)
(9)
(7)
(8)
(1)
(3)
(4)
(5)
(10)
Fig. 5-4 Inserting the tube set
(2) Tap spikes
(5) Irrigation tube
(7) Roller tube
(8) Pressure chamber with mem-
brane and transponder
(9) Instrument tube
(11) Fluid bag
(12) Tube retainer
(13) Roller wheel
(2)
(5)
(7)
(12)
(11)
(8)
(9)
(13)