Use Instructions

Table Of Contents

Operating the Device

WARNING!

Make sure to connect tubes as indicated by the matching connectors.

In order to separate sterile from non-sterile areas, assign the following tasks to

the "sterile" or "non-sterile" nurse or medical technician. The indicated numbers

refer to Fig. 5-9 Day tube set elements, Fig. 5-10 Patient tube elements and Fig.

5-11 Inserting the day patient tube set.

Remove day patient tube set1. To be carried out by non-sterile technician:

 Open the packaging of the day tube and keep it with you.

 Open the packaging of the patient tube and have a sterile technician remove

it for you.

Connect patient tube2. To be carried out by sterile technician:

 Keep the Luer lock connector (14) in the sterile area and hand the tube end

with the hygiene connector (12) to the non-sterile technician.

 Connect the Luer lock connector (14) with the instrument (e.g., inflow can-

nula). Open inflow valve at instrument.

Fig. 5-11 Inserting the day patient tube

set

(2) Tap spikes

(3) Tube clamps

(5) Irrigation tube

(8) Pressure chamber with mem-

brane and transponder

(9) Instrument tube

(10) Hygiene connector

(16) Fluid bag

(17) Tube retainer

(18) Roller wheel

(3)

(5)

(8)

(17)

(16)

(18)

(10)

(9)

(2)