Datasheet

U.I. Lapp
GmbH
PRODUCT INFORMATION
ÖLFLEX® CLASSIC 100
12.09.2012
PN 0486/01_03.10
Space-saving installation due to small cable diameters
High electrical performance due to 4 kV test voltage
HIgh flexibility due to short-twisted conductor layers
Info
Up to 1.5 mm²: Nominal voltage U0/U: 300/500V From 2,5mm²: Nominal voltage U0/U: 450/750V
Customised colour option and printing on the outer sheath are available upon request
Application range
Plant engineering Industrial machinery Heating and air-conditioning systems Power stations
Dry or damp rooms that are subject to medium mechanical loads
For fixed installation as well as occasional flexing at free, non-continuously recurring movement without tensile load
Suitable for torsional applications which are typical for the loop in wind turbine generators (WTG)
Design
Fine-wire strand made of bare copper wires
PVC insulation LAPP P8/1
Cores twisted in layers
PVC outer sheath, grey (RAL 7001)
Product features
Flame-retardant according to IEC 60332-1-2
Good chemical resistance see Appendix T1
Remark
Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon
request.
Copper price basis: EUR 150/100kg. Refer to Appendix T17 for the definition and calculation of copper-related surcharges.
Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths
Packaging size: coil ≤ 30 kg or ≤ 250 m, otherwise drum
Please specify the preferred type of packaging (e.g. 1 x 500 m drum or 5 x 100 m coils).
Single lengths for sizes: ≥ 5G50 max. 500 m; ≥ 5G95 max. 400; ≥ 3G120 max. 500 m; ≥ 4G120 max. 300; ≥ 4G185 max. 250 m
Photographs are not to scale and do not represent detailed images of the respective products.
Product Management Document: LAPP_PRO100890EN.pdf
1 / 5
©2012 Lapp Group - Technical changes reserved
Photographs are not to scale and do not represent detailed images of the respective products.