Data Sheet

U.I. Lapp
GmbH
DATA SHEET
ÖLFLEX
®
SOLAR XLS-R
DB 0023100EN
valid from: 01.10.2011
Originator: H. Hörtnagl / PCM
approved: PDC
Document: DB0023100EN page 1 of 2
All deviations from this specification are subject to explicit consent of U.I. Lapp GmbH. All rights reserved acc. to DIN 34.
PD 0019/2.1_11.09EN
1. Application
ÖLFLEX
®
SOLAR XLS-R cables are weather-, abrasion- and UV-resistant photovoltaic cables. These cross-linked, halogen
free and double insulated solar cables are suitable for permanent outdoor use and especially for the interconnection of
grounded and ungrounded photovoltaic power systems. They are applicable for the connection of solar panels among them-
selves and as extension cable between the individual module strings or the DC/AC inverter.
2. Cable design
1. Conductor: Fine wire strands of tinned copper according to IEC 60228, Class 5
2. Core insulation: Temperature resistant and halogen free polyolefine co-polymer,
electron beam cross-linked
Colour: white, red or blue
3. Outer sheath: Flame retardant, weather resistant and halogen free polyolefin co-polymer,
electron beam cross-linked,
Outer sheath colour: black
3. Electrical properties
Rated voltage U
0
/U acc. IEC AC 600/1000 V
DC 900/1500 V
Max. permissible operating voltage DC 1800 V (conductor/conductor, non earthed system)
Test voltage AC 6,5 kV
4. Thermal properties
Temperature range fixed installation: -40 °C up to +100 °C
(max. conductor temperature according to IEC 60216)
High temperature pressure resistance according EN 60811-3-1
Damp heat resistance according EN 60068-2-78 at 85% humidity
5. Mechanical properties
Minimum bending radius occasional flexing: 15 x cable diameter
fixed installation: 5 x cable diameter
Dynamic penetration resistance according DKE requirement specification PV1-F AK 411.2.3 Annex F
Notch propagation resistance according DKE requirement specification PV1-F AK 411.2.3 Annex G
Tensile strength and elongation
of insulation and jacket according EN 60811