Datasheet

ManualsBrandsLapp ManualsCable & WireMains Cable 2x 1mm² Copper Unshielded 500V 50m Grey

U.I. Lapp

GmbH

DATA SHEET

ÖLFLEX

CLASSIC FD 810

DB 0026100

valid from: 22.09.2015

Originator: KASC / PDC

approved: HAPF / PDC

Document: DB0026100EN

Page 1 of 1

PD 0019/2.2_11.10EN

Application

ÖLFLEX



CLASSIC FD 810 cables are high flexible, power and control cables with sheath of PVC for flexible use and fixed

installation under normal mechanical load conditions. They are designed for use in dry, damp or wet rooms. They may only

be installed outdoors with UV-protection and considering the temperature range. The cables are generally resistant against

acids, caustics solution and specific oils. Usage on motor drum guidance or under a strain of more than 15 N/mm

is not

allowed.

Application range:

In power chain or moving machine parts; suitable for use in measuring, control and regulating circuits; power circuits for

electrical equipment used in automation engineering; assembly lines, production lines in all kinds of machines; plant engi-

neering

Design

Design based on

EN 50525-2-51 resp. VDE 0285-525-2-51

Conductor fine wire strands of bare copper acc. to IEC 60228 that is VDE 0295, class 6

Core insulation LAPP special PVC compound P8/1 with increased requests to Lapp specifification

TI2, acc. to EN 50363-3 resp. VDE 0207-363-3

Core identification acc. to VDE 0293-1, with or without GN / YE ground conductor,

black cores with white numbers acc. to EN 50334 resp. VDE 0293-334

Outer sheath PVC-compound TM2 acc. to EN 50363-4-1 resp. VDE 0207-363-4-1

with increased requests to LAPP specification

colour: silver grey, similar RAL 7001

Electrical properties

Nominal voltage U

/U: 300/500 V

Test voltage Core / Core: 4000 V

Mechanical and thermal properties

Min. bending radius occasional flexing: 7,5 x outer diameter

fixed installation: 4 x outer diameter

Number of bending/ unbending

cycles 5 mio. cycles

Travel distance 10 m

Temperature range occasional flexing: 0 °C up to +70 °max. conductor temp.

fixed installation: -40 °C up to +70 °C max. conductor temp.

Flame retardant acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2

Tests acc. to IEC 60811, EN 50395, EN 50396

EC-Directives These cables are conform to the EU-Directives 2014/35/EU (Low Voltage Directive)

and 2011/65/EU (RoHS, Restriction of the use of certain hazardous substances).

Summary of content (1 pages)

PAGE 1
DATA SHEET U.I. Lapp GmbH ÖLFLEX® CLASSIC FD 810 DB 0026100 valid from: 22.09.2015 Application ÖLFLEX CLASSIC FD 810 cables are high flexible, power and control cables with sheath of PVC for flexible use and fixed installation under normal mechanical load conditions. They are designed for use in dry, damp or wet rooms. They may only be installed outdoors with UV-protection and considering the temperature range. The cables are generally resistant against 2 acids, caustics solution and specific oils.